Samsung SC-D180-XAP - Manual (Page 62)

ENGLISH
Advanced Recording
✤ You can customize settings and save them for future use.
■ The CUSTOM SET function operates in CAM and M.REC mode only.
✤ Please set the custom settings before using this function. (see page 48)
1. Set the power switch to CAM mode.
2. To activate the CUSTOM function, press the CUSTOM button.
■ “CUSTOM.Q” will be displayed on the screen.
3. Press START/STOP to start recording.
■ Recording will begin using the CUSTOM settings.
4. To switch CUSTOM mode off, press the CUSTOM button again.
■ The camcorder will revert to the settings that were set prior to
custom mode being selected.
Note
■ The CUSTOM mode settings are deleted when a battery pack is removed and
therefore must be reset when a battery pack has been replaced.
58
CUSTOM Mode
MIRROR
CUSTOM 0 : 0 0 : 0 0
10:00 PM
JUN. 1, 2002
STBY
5 3 min
CUSTOM EASY