Samsung SC-D180-XAP - Manual (Page 61)

57
ENGLISH
Advanced Recording
EASY Mode (for Beginners)
✤ The EASY mode allows a beginner to make good recordings easily.
■ The EASY mode operates in CAM and M.REC mode.
1. Set the power switch to CAM mode.
2. By pressing the EASY button, all functions on the camera will be set to off and
the recording settings will be set to the following basic modes:
■ Battery level, recording mode, counter, DATE/TIME, and EIS ( ) will be displayed.
■ The word “EASY.Q” will appear on the LCD at the same time.
However, the DATE/TIME will only be seen if it has been previously set. (see page 52)
3. Press START/STOP to start recording.
■ Recording will begin using the basic automatic settings.
4. Pressing the EASY button again turns the EASY mode off.
■ The camera will return to the settings that were set prior to activating EASY mode.
Notes
■ In EASY mode, certain functions are not available, such as MENU, BLC, MF/AF.
- If you want to use these functions, you must first switch the EASY mode off.
■ The EASY mode settings are deleted when the battery pack is uninstalled from the camcorder and therefore,
they must be reset when a battery pack has been replaced.
EASY 0 : 0 0 : 0 0
53 min
10:00 PM
JAN. 1, 2002
STOP
CUSTOM EASY