Samsung SC-D180-XAP - Manual (Page 55)

ENGLISH
Advanced Recording
51
● WIND CUT
✤ The WIND CUT function works in CAM and VCR modes.
✤ The WIND CUT function minimizes wind noise or other noise while recording.
-
When the wind cut is on, some low sounds are eliminated along with the sound of the wind.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
■ The menu list will appear.
3. Turn the MENU DIAL to highlight A/V and push the MENU DIAL.
4. Select WIND CUT from submenu.
5. This feature toggles ON/OFF each time you push the MENU DIAL.
■ is shown in the display when you turn the WIND CUT on.
6. To exit, press the MENU button.
Notes
■ Make sure WIND CUT is set to off when you want the microphone to be as sensitive as possible.
■ Use the WIND CUT when recording in windy places such as the beach or near buildings.
CAM MODE
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
12
SOUND1 AUDIO SELECT
WIND CUT
A / V SET
CAM MODE
INITIAL
WIND CUT
REC MODE
PHOTO SEARCH
COPY
AUDIO MODE
12
AUDIO SELECT
CAMERA
A/V
MEMORY
VIEWER