Samsung HW-H600-ZA - Manual (Page 20)

20
FUNCTIONS
Samsung may offer upgrades for the
SoundStand's system firmware in the future.
If an upgrade is offered, you can upgrade the
firmware by connecting a USB device with the
firmware upgrade stored on it to the USB port on
your SoundStand.
Note that if there are multiple upgrade files, you
must load them onto the USB device singly and use
them to upgrade the firmware one at a time.
Please visit samsung.com or contact the Samsung
call center to receive more information about
downloading upgrades files.
● Insert a USB device containing the
firmware upgrade into the USB port on
the main unit.
● Do not disconnect the power or remove
the USB device while upgrades are being
applied. The main unit will turn off
automatically after completing the
firmware upgrade.
When software is upgraded, all settings
are reset to their factory default settings.
We recommend you write down your
settings so that you can easily reset them
after the upgrade.
● Once the software upgrade is completed,
turn off the product and then press and
hold the (►) button for a while to reset
the product.
● If the firmware fails to upgrade, we
recommend formatting the USB device in
FAT16 and trying again.
● Do not format the USB device in the NTFS
format. The SoundStand does not support
the NTFS file system.
● Depending on the manufacturer, some
USB devices may not be supported.
SOFTWARE UPGRADE