Samsung HW-H600-ZA - Manual (Page 14)

14
FUNCTIONS
INPUT MODE
Press the SOURCE button on the remote control or the ( ) button on the product's top panel to select
the mode you want.
SOURCE
MUTE
POWER
VOL
WOOFER
SOURCE
FUNCTIONS
Input mode Display
Optical Digital input D.IN
AUX input AUX
HDMI input HDMI
BLUETOOTH mode BT
TV mode TV
USB mode USB
The unit turns off automatically in the following
situations.
● D.IN/HDMI/BT/TV/USB/ARC Mode
- If there is no audio signal for 25 minutes.
● AUX Mode
- If the AUX cable is disconnected for 25
minutes.
- If there is no KEY input for 8 hours when the
AUX cable is connected. To turn this function
ON or OFF, press and hold the
button for
5 seconds. AUTO POWER DOWN ON / OFF
appears on the display.
ARC (HDMI OUT)
HDMI Cable
● The ARC function allows digital audio to output via the HDMI OUT (ARC) port.
It can be enabled only when the SoundStand is connected to a TV that supports the ARC function.
● ANYNET+ must be turned on.
● This function is not available if the HDMI cable does not support ARC.
● The ARC function is activated in D.IN mode if you have connected the unit to a TV that supports
ARC.
● To turn off the ARC function, turn ANYNET+ off.