Samsung HW-H600-ZA - Manual (Page 15)

15
ENG
FUNCTIONS
BLUETOOTH
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
+ To connect the SoundStand to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
Bluetooth device
Connect
1. Press the SOURCE button on the remote
control or the ( ) button on the product's top
panel to display the BT message.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3. Select the Stereo headset menu on the Bluetooth
device.
• You will see a list of scanned devices.
4. Select "[Samsung] SoundStand" from the list.
• When the SoundStand is connected to the
Bluetooth device, it will display [Bluetooth
device name]
➞ BT on the front display.
• The device name can only be displayed in
English. An underline " _ " will be displayed if
the name is not in English.
• If the Bluetooth device has failed to pair with
the SoundStand, delete the previous
"[Samsung] SoundStand" found by the
Bluetooth device and have it search for the
SoundStand again.
5. Play music on the connected device.
• You can listen to the music playing on the
connected Bluetooth device over the
SoundStand.
• In BT mode, the Play/Pause/Next/Prev
functions are not available. However, these
functions are available in Bluetooth devices
supporting AVRCP.
● If asked for PIN code when connecting a
Bluetooth device, enter <0000>.
● Only one Bluetooth device can be paired
at a time.
● Bluetooth connection will be terminated
when you turn the SoundStand off.
● The SoundStand may not perform
Bluetooth search or connection correctly
under the following circumstances:
- If there is a strong electrical field around
the SoundStand.
- If several Bluetooth devices are
simultaneously paired with
SoundStand.
- If the Bluetooth device is turned off,
not in place, or malfunctions.
- Note that such devices as microwave
ovens, wireless LAN adaptors,
fluorescent lights, and gas stoves use
the same frequency range as the
Bluetooth device, which can cause
electric interference.
● The SoundStand supports SBC data
(44.1kHz, 48kHz).
● Connect only to a Bluetooth device that
supports the A2DP (AV) function.
● You cannot connect the SoundStand to a
Bluetooth device that supports only the HF
(Hands Free) function.