Samsung SPP4231KX-XAA - Manual (Page 52)

52
Selecting a Signal Source (Antenna or
Cable) for PIP
If the PIP source is TV while PIP is ON, you can select the broadcasting source of PIP picture
separately from the main picture.
1 Press the MENU button. Press the ▲ or ▼ button to
select “Picture”, then press the ENTER button.
2 Press the ▲ or ▼ button to select “PIP”, then press
the ENTER button.
3 Press the ▲ or ▼ button to select “Air/CATV”, then
press the ENTER button.
4 If an antenna is connected, the setting is “Air”. If a
Cable TV system is providing the signal, press the
▲ or ▼ button until the appropriate type of cable
system is selected (“STD”, “HRC” or “IRC”).
5 Press the MENU button to exit the menu.
Mode : Custom √
Custom √
Color Tone : Normal √
Color Control √
Film Mode : Off √
Size : 16:9 √
DNIe : On √
PIP √
Picture TV
Move Enter Return
PIP : On √
Source : TV √
Swap √
Size : √
Position : √
Air/CATV : Air √
Channel : 4 √
PIP TV
Move Enter Return
PIP : On
Source : TV
Swap
Size
:
Position :
Air/CATV : Air
Channel : 4
PIP TV
Move Enter Return
PIP : On
Source : TV
Swap
Size
:
Position :
Air/CATV : Air
Channel : 4
PIP TV
Move Enter Return
Air
STD
HRC
IRC
Air
STD
HRC
IRC
BN68-00631B-00_014-061Eng 2004.6.9 10:57 AM Page 52