When using a new disc: formatting a new disc – Samsung SC-DX103-XAP User Manual
Page 41
English _
31
• Move the grip belt so it does not interfere with inserting or ejecting the disc.
• The disc cover can be opened when the device is connected to an AC power adaptor or the battery pack,
even if the power is off.
Caution
This product utilises a laser. Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
Do not open covers and do not look inside the product if interlock mechanism is damaged.
Warning
Be careful not to damage the interlock mechanism.
When using a new disc: formatting a new disc
Formatting may be required if a new disc is inserted.
Recognition of the disc will start.
For a DVD-R/+R DL disc: Formatting will automatically begin.
For a DVD-RW disc: The Format menu is offered. Select the recording format, Video mode or VR mode.
Format the disc in the “Disc Manage” menu when you want to format again. page 50
Differences
between Video
and VR mode
Video (Video Mode) : If the disc has been finalized, you will be able
to play the disc on most DVD players/recorders/drives.
VR (VR Mode) : You can edit the disc on a DVD camcorder, but playback
is possible only on a DVD recorder that supports VR mode.
For a DVD+RW disc
: The Format menu is offered. Formatting makes the recorded disc new and reusable by
deleting all the data recorded on the disc.
pickup lens
- Refer to page 8 for finalized disc compatibility.
Format the disc in Video mode?
- Can play in DVD devices.
- Cannot edit in camcorder.
If not, Remove the disc.
Video
VR
(AD68-02550A) SC-DX100_ENG_IB.indb 31
2008-03-10 ¿АИД 4:16:24