beautypg.com

Troubleshooting – Samsung SC-DX103-XAP User Manual

Page 118

background image

108_ English

Symptom

Explanation/Solution

The actual recording time is less than

the estimated recording time.

• The estimated recording time is calculated by some references.

• When you record an object that moves fast, the actual recording time may be

shortened.

The recording stops automatically.

• The internal temperature of your camcorder is extremely low. Keep it turned

on and wait until it warms up.

• If you make a frequent recording or deletion of files, the performance of the

storage media will deteriorate. In this case, format the storage media again.

• If you use the memory card with low writing speed, the DVD camcorder

automatically stops recording the movie images then the corresponding

message appears on the LCD screen.

When recording a subject illuminated

by bright light, vertical line appears.

• This is not a malfunction.

When the screen is exposed to direct

sunlight during recording, the screen

becomes red or black for an instant.

• This is not a malfunction.

During recording, the date/time does

not display.

• “Date/Time” is set to “Off.” Set the “Date/Time” to on. page 29

You cannot record a photo image.

(SC-DX103/ DX105 only)

• Set your camcorder to the digital camera (memory card) record mode.

page 30

• Release the lock on the write-protection tab of the memory card if any.

• The memory card is full. Use a new memory card or format the memory card.

pages 52-54

Or remove unnecessary images. page 61

• You cannot take photo images on a disc. Set the Storage mode switch to

CARD.

There is a time difference between

the point where you press Recording

start/stop button and the point where

the recorded movie starts/stops.

• On your camcorder, there may be a slight time delay between the point

when you press Recording start/stop button and the actual point where the

recorded movie starts/stops. This is not an error.

The aspect ratio (16:9/4:3) of a movie

cannot be changed.

• The aspect ratio of a movie at 16:9 cannot be changed to 4:3.

troubleshooting

(AD68-02550A) SC-DX100_ENG_IB.indb 108

2008-03-10 ¿АИД 4:20:13

This manual is related to the following products: