Samsung SC-DX103-XAP - Manual (Page 36)

26_ English
USING THE DISPLAY ( ) BUTTON
Switching the information display mode
You can switch between the on-screen information display modes:
Slide the POWER switch downwards to turn on the power, and then press the Display
( ) button.
Each press of the Display button toggles the OSD (On Screen Display) function on and off.
• Full display mode: All information will appear.
• Minimum display mode: Only operating status indicators will appear.
If the DVD camcorder has warning information, a warning message will appear.
USING THE JOYSTICK
The Joystick is used to make a selection and to move the cursor left, right, up and down.
Using the Joystick, you can easily make your selection and navigate the menu.
1. Move to a previous menu item / Adjust the selected item (to the left).
2. Move to a sub menu item / Adjust the selected item (to the right).
3. Move to a lower menu item.
4. Move to an upper menu item.
5. Press to select the chosen item (Select).
preparation
1 2 3 4 5
(AD68-02550A) SC-DX100_ENG_IB.indb 26 2008-03-10 ¿АИД 4:16:09