beautypg.com

Using the intelli-studio program – Samsung HMX-W200TN-XAA User Manual

Page 72

background image

66

Using with a Windows computer

USING THE Intelli-studio PROGRAM

Intelli-studio is a built-in program that allows you to play back and
edit files. You can also upload files to web sites, such as YouTube
or Flickr.

Step 1. Connecting the USB plug

1

Set "PC Software" to "On".

¬page 62

This is the default setting.

2

Connect the built-in USB plug of the product to the USB port of
your PC.

A new file saving window appears along with the Intelli-studio
main window. If your product has no new files, the pop-up
window for saving new files will not appear.
Depending on your version of Windows, the Windows
removable disk window may also appear.

3

Click "Yes" in the new file saving window. The uploading
procedure starts. Click "Yes" to confirm.

If you do not want to save any new files, select "No".

To disconnect the USB plug

To disconnect the USB plug after completing the file transfer, you
must follow these steps:

1. Click the "Safely Remove Hardware" icon on the taskbar.

2. Select "USB Mass Storage Device", and then click "Stop".

3. If the "Stop a Hardware device" window appears, click "OK".

4. Disconnect the product’s built-in USB plug from the PC.

Make sure you insert the USB plug into the USB port with the plug
facing in the correct direction.
When the built-in USB plug is connected, turning the product on or
off may cause the PC to malfunction.
If you disconnect the product’s built-in USB plug from the PC while
transferring files, the data transmission will stop and the data may be
damaged.
If you connect the built-in USB plug to a PC via a USB HUB or
simultaneously connect the built-in USB plug along with other USB
devices, the product may not work properly. If this occurs, remove
all USB devices from the PC, and then reconnect the product.
Intelli-studio may not automatically run. If this occurs, access My
Computer or Windows Explorer, open the drive that corresponds to
your product, find Intelli-studio, and then run IStudio.exe.
The product turns off if you remove its USB plug from the USB port
of the computer.

This manual is related to the following products: