Samsung HMX-Q10UN-XAA - Manual (Page 32)

28
Basic operation of the camcorder
SETTING THE TIME ZONE AND DATE/TIME
FOR THE FIRST TIME
Set the date and time of your local area when turning on this
camcorder for the first time.
1
Open the LCD screen to turn on the camcorder.
The time zone (“Home”) screen appears based on Lisbon
and London (Greenwich Mean Time).
2
Select your local area on the map by touching the left ( ) or
right ( ) tab on the LCD screen, and then press the ( ) tab.
The “Date/Time Set” screen appears.
Home
London,Lisbon
[GMT-00:00] JAN/01/2011 12:00AM
3
Set the date by touching the corresponding item or dragging it
to up or down.
JAN 01 2011
Date / Time Set
Month Date Year
•
•
4
Touch the time ( ) tab, and then set the time by touching the
corresponding item or dragging it to up or down.
Date / Time Set
12 00 AM
Hr Min
5
Make sure the clock is correctly set, and then touch the ( )
tab.
The date/time setting finishes.
You can set the year up to 2037, based on the “Home” item.
Set “Date/Time Display” to On.
¬page 68
Activating the ( ) icon moves the time forward by 1 hour.
•
•
•
Internal rechargeable battery
Your camcorder includes a internal rechargeable battery that
retains the date and time settings even after the power is turned
off.
If the battery is depleted, the current date/time values are reset to
the default values. If this occurs, you need to recharge the internal
rechargeable battery (see below), and then re-set the current date
and time.
Charging the internal rechargeable battery
The internal battery is always recharged while your camcorder is
connected to the AC power or while the battery is attached.
If you have not used the camcorder for about 2 weeks and you
have not connected the AC power or the battery to it, the internal
battery fully discharges. If this occurs, charge the internal battery
by connecting the camcorder to the supplied AC adaptor for 24
hours.
•
•
•
•
•