Samsung HMX-Q10UN-XAA - Manual (Page 101)

97
Troubleshooting
USB
Message Icon Informs that... Action
Fail Printer
Connecting
Change 'USB
Connect'
-
A problem occurred when connecting the
camcorder via USB to a printer.
Check the USB cable.
Try the connection procedure again.
Switch “USB connect” function to “PictBridge”. •
•
•
Fail USB
Connecting
Change 'USB
Connect'
-
A problem occurred when connecting the
camcorder via USB to a PC.
Check the USB cable.
Try the connection procedure again.
Switch “USB connect” function to “Mass
Storage”. •
•
•
Ink Error - There is a problem with an ink cartridge.
Check the ink cartridge.
Put a new ink cartridge into the printer. •
•
Paper Error - There is a problem with the paper.
Check the paper in the printer. If there is no
paper, insert paper. •
File Error - There is a problem with the file.
Your camcorder does not support this file format.
Try another file recorded on your camcorder. •
•
Printer Error There is a problem with the printer.
Turn the printer’s power off and on.
Contact the printer manufacturer’s service center. •
•
Print Error - A problem occurred during printing.
Do not remove power source or eject memory
card during printing. •