Samsung HPR4252X-XAC - Manual (Page 117)

117
1 Press the MENU button.
Press the
▲ or ▼ button to select “Setup”, then press
the ENTER button.
2 Press the ▲ or ▼ button to select “Screen Burn
Protection”, then press the ENTER button.
3 Press the ▲ or ▼ button to select “All White” or “Signal
Pattern”, then press the ENTER button.
• All White: This function removes after-images on the
screen by changing the color of pixels to
white. Use this function when there are
remaining after-images or symbols on the
screen especially when you displayed a
still image on the screen for a long time.
• Signal Pattern: This function removes after-images on
the screen by moving all the pixels on
the PDP according to a pattern. Use
this function when there are remaining
after-images or symbols on the screen
especially when you displayed a still
image on the screen for a long time.
4 Press the MENU button to exit.
Notes
• To remove after-images on the screen, use either the “All White” or “Signal Pattern” function.
Although both functions remove after-images on the screen, “Signal Pattern” is more effective.
• The after-image removal function has to be executed for a long time (approximately 1 hour) to
effectively remove after-images on the screen. If the after-image is not removed after performing
the function, repeat the function again.
Reducing the Effects of Screen Burn
If screen burn has occurred, you can select a white screen or signal pattern (rolling screen) to help
remove screen burn artifacts.
Pixel Shift √
All White √
Signal Pattern √
Screen Burn Protection T V
Move Enter Return
Pixel Shift √
All White √
Signal Pattern √
Screen Burn Protection T V
Move Enter Return
Pixel Shift √
All White √
Signal Pattern √
Screen Burn Protection T V
Move Enter Return
Plug & Play √
Language : English √
Time √
V-Chip √
Caption √
Menu Transparency : Medium √
† More
Setup T V
Move Enter Return
BN68-00835A-00(116~133) 4/6/05 8:34 PM Page 117