Samsung SC-D903-XAC - Manual (Page 80)

ENGLISH
76 76
IEEE 1394 Data Transfer
Connecting to a DV device
✤ Connecting with other standard DV products.
■ A standard DV connection is quite simple.
If a product has a DV port, you can transfer data by connecting to the DV port using an IEEE cable.
!!! Please be careful since there are two types of DV ports, (4pin, 6pin). This camcorder has a 4pin terminal.
✤ With a digital connection, video and audio signals are transmitted in digital format, allowing high quality images
to be transferred.
Connecting to a PC
✤ If you want to transmit data to a PC, you must install an IEEE 1394 add-on card onto the PC. (not supplied)
✤ The frame rate recorded for video capturing is dependent on the capacity of the PC.
Notes
■ When you transmit data from the camcorder to another DV device, some functions may not work.
If this occurs, please reconnect the DV cable or turn the power OFF and ON again.
■ When you transmit data from the camcorder to PC, PC function button is not available in M.PLAY mode.
■ Do not use the camcorder and IEEE1394 together as this will cause IEEE1394 to shut off.
Transferring IEEE1394 (i.LINK)-DV standard data connections
00792B SCD903 USA (64~109) 5/14/04 10:46 AM Page 76