Samsung SC-D903-XAC - Manual (Page 67)

ENGLISH
63 63
Advanced Recording
✤ The EASY mode allows a beginner to easily make good quality video recordings.
■ The EASY mode only operates in CAMERA mode.
1. Set the power switch to CAMERA mode.
2. By pressing the EASY Q button, all functions on the camera will be set to off and the recording
settings will be set to the following basic modes:
■ Battery level, recording mode, counter, DATE/TIME, and EIS ( ) will be displayed.
■ The word “EASY.Q” will appear on the LCD at the same time.
However, the DATE/TIME will only be seen if it has been previously set. (see page 57)
3. Press START/STOP to start recording.
■ Recording will begin using the basic automatic settings.
■ The camera will return to the settings that were set prior to activating EASY Q mode.
4. Pressing the EASY Q button again turns the EASY mode off.
■ The camera will return to the settings that were set prior to activating EASY mode.
Notes
■ In EASY mode, certain functions are not available, such as MENU, BLC, AF/MF.
-
If you want to use these functions, you must first switch the EASY mode off.
■ The EASY mode settings are deleted when the battery pack is removed from the camcorder and therefore must be reset
when a battery pack has been replaced.
EASY Mode (for Beginners)
0 : 0 0 : 0 0
1 0 : 0 0 A M
J A N . 1 0 , 2 0 0 4
STBY
EASY
5 5 min
EASY
00792B SCD903 USA (28~63) 5/14/04 10:45 AM Page 63