Samsung SC-D903-XAC - Manual (Page 52)

ENGLISH
Advanced Recording
● EIS (Electronic Image Stabilizer)
✤ The EIS function works in CAMERA mode only.
✤ EIS (Electronic Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the
camcorder (within reasonable limits).
✤ It provides more stable pictures when:
■ Recording with the zoom
■ Recording a small object close-up
■ Recording and walking at the same time
■ Recording through the window of a vehicle
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
■ The menu list will appear.
3. Move the MENU SELECTOR highlight to CAMERA and push the MENU SELECTOR.
■ The sub menu list will appear.
4. Move the MENU SELECTOR to activate the EIS function, push the MENU SELECTOR.
■ The EIS menu is changed to ON.
■ If you do not want to use the EIS function, set the EIS menu to OFF.
5. To exit, press the MENU button.
Notes
■ It is recommended that you deactivate the shake compensation function when using a tripod.
■ If you use the EIS function, the picture quality may deteriorate.
■ While setting the EIS to ON, the WIDE [16:9], STROBE (DSE function) mode do not work.
CAM MODE
INITIAL
PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
MEMORY MIX
FLASH SELECT CAMERA
A/V
MEMORY
VIEWER
CAM MODE
PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
MEMORY MIX
FLASH SELECT
CAMERA SET
48 48
00792B SCD903 USA (28~63) 5/14/04 10:45 AM Page 48