Aastra Telecom 9417CW - Manual (Page 34)

30
Selecting the dial pad mode
When you select the dial pad mode, you are turning the Live dial pad option on or off.
With Live dial pad on, the telephone chooses the prime line and automatically dials out
and turns on Handsfree as soon as you press a dial pad key or a memory key. When Live
dial pad is off, the telephone is in predial mode. This means after you dial the telephone
number you must lift the handset or press either
∂, ¬, or © before the
telephone number is dialed.
Entering area codes
When you enter an area code or prefix using this feature, your 9417CW telephone will
remove that code or prefix from incoming numbers. For example, if you enter your area
code into this option, all calls in your area code will appear in the Callers List with the
area code stripped off (the area code will appear in brackets after the number). This may
make it easier to identify local calls. You can enter three separate area codes or prefixes,
each up to seven digits long.
To select the dial pad mode:
1. Press the Set Options key.
2. Press
•
to enter the Option List.
3. Use
ª
to scroll to number 2 or press
¤
.
4. Press
¤
to change the dial pad mode.
5. Press
®
.
To enter area codes and prefixes:
1. Press the Set Options key.
2. Press
£
to enter the Setup List.
3. Use
ª
to scroll to number 3 or press
‹
.
4. Press
‹
.
5. Enter the area code or prefix using the dialpad and press
ß
.
Repeat this steps 4 and 5 for each area code or prefix you want to enter.
To delete or edit an area code or prefix:
1. Press the Set Options key.
2. Press
£
to enter the Setup List.
3. Use
ª
to scroll to number 3 or press
‹
to go directly to the item.
4. Press
‹
. The first area code is displayed. If this is the number you want to delete or
change, go to step 6.
5. Press
ß
until you see the number you want to change or delete
.
6. Press
“
to backspace and delete, or change the area code or prefix.
7. Press
ß
.
8. Press
®
.
P0844339 04 E UG 9417CW Page 30 Thursday, April 20, 2000 11:09 AM