Samsung SECR410ZRAMTR - Manual (Page 139)

Settings 136
Phone Settings
The “Enter Code” prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3. Press
for Restriction.
4. Use the Up/Down navigation keys to highlight Outgoing or Incoming.
5. Press the key. The following options appear in the display:
• Allow All — No restriction on selected calls.
• Allow None — Restrict (block) all selected calls.
• Allow Contacts — Restrict selected calls from/to numbers not in your
Contacts list.
Note: The default restriction settings are all Off.
6. Use the Up/Down navigation keys to highlight the Restriction you want,
then press the key.
NAM Selection
NAM Selection allows you to set your preferred system. Contact your wireless
carrier for more information.
1. From the Settings menu, press (for Phone Settings), and
for NAM Selection.
The following NAM options appear in the display:
• NAM 1 — Your service contract has one phone line.
• NAM 2 — Your service contract has two phone lines.
2. Use the Up/Down navigation keys and to highlight NAM 1 or NAM 2, the
press to save your selection.
The phone automatically restarts.
System Select
The System Select feature enables you to automatically or manually select the
network used when roaming outside of your home area.
1. From the Settings menu, press (for Phone Settings), and
for System Select. The following roaming options appear in the
display:
OK
OK
OK