Samsung SECR410ZRAMTR - Manual (Page 135)

Settings 132
Phone Settings
1. From the Settings menu, press (for Phone Settings), and
for Language.
The following options appear in the display:
• English
• Español
2. Use the Up/Down navigation keys to highlight your language preference,
then press the key.
Security
Use the Security sub-menu to lock your phone, set up emergency numbers, enable
or disable voice privacy, set restrictions, and other security options.
Lock Phone
Locking the phone blocks all outgoing calls except those to 911 and to the three
user-programmed emergency numbers. You can lock the phone manually, or set the
phone to lock automatically when turned on. In Lock mode, you can answer calls,
but you must unlock the phone to place calls (except to emergency and secret
numbers).
Important!: If you change the NAM1 setting after setting the phone to lock upon power-up and did not
program a number into NAM2, you won’t be able to access your phone. You must call the
Service Center to unlock your phone.
1. From the Settings menu, press (for Phone Settings), and
for Security.
The “Enter Code” prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3. Press for Lock Phone. The following options appear in the
display:
• Lock — The phone locks immediately and stays locked until you enter the lock
code.
• Unlock — The phone remains unlocked.
• On Power Up — The phone locks automatically the next time your phone is
powered on and stays locked until you enter the lock code.
OK