Assembly, Assembl y – Alamo RX96 User Manual
Page 91
ASSEMBLY
RX96 03/09
Assembly Section 3-7
© 2009 Alamo Group Inc.
ASSEMBL
Y
FRONT AND REAR DEFLECTORS (Standard Equip.) CHAINGUARDS
(Optional Equip. at Extra Cost)
Front and Rear Rubber-Fabric Deflectors are Standard Equipment and Front and Rear
Chainguards are optional at extra cost. One type of guards must be installed (and
maintained in good repair) except for agricultural purposes only in areas where persons,
vehicles, livestock, or other property will not be endangered by thrown objects and where
such safety equipment would prevent the mower’s reasonable performance of its assigned
agricultural task.
DEFLECTORS: Front and Rear Deflectors (Standard Equipment) are recommended for the average user and
will provide protection from thrown objects with proper operation under normal conditions. Deflectors must be
maintained in good repair or replaced after no more than two inches of wear off lower edge.
Figure Asm-R-0293 & Asm-R-0294
Front Deflector - (FIGURE Asm-R-0293)
Attach the front Rubber Deflectors (1) to the
Mower with Bracket Straps (2), 1/2" x 1-1/4"
Bolts (7), Flatwashers (8) and Locknuts (6).
Rear Deflector - (FIGURE Asm-R-0294)
Attach the rear Rubber Deflectors (1) to the
Mower with Bracket Straps (2) 1/2" x 1-1/4"
Bolts (4), and Locknuts (3).