Samsung SCH-A950WRVXAR - Manual (Page 38)

38
Sect
ion 3
confirm the correct one. You can control when choice lists
appear by changing the Choice Lists setting to the following:
• Automatic: Voice Signal displays a choice list when it is not
confident it has identified the correct choice from among
multiple alternatives.
• Always On: When there are multiple alternatives, Voice
Signal always displays a choice list.
• Always Off: Voice Signal never displays a choice list.
Instead, the application picks the best from among the possible
choices.
• Sensitivity: In Voice Signal, sensitivity controls the balance
between rejecting too much, which means the phone
frequently does not recognize names, numbers, or
commands, and rejecting too little, which means it
frequently recognizes something even if nothing was said.
When Voice Signal rejects an utterance, it displays a
message such as “Please repeat…” or “No match found.” If
you frequently experience these messages, you might be
able to get better recognition by adjusting the Sensitivity
setting toward Reject Less. If you frequently experience
false activations (Voice Signal detects a wrong match), you
might be able to get better performance by adjusting the
Sensitivity setting toward Reject More.
• Digit Dialing: Use the Digit Dialing menu to adapt digit
dialing to your voice.
• Adapt Digits: Lets you adapt digits, which can improve
voice recognition of phone numbers. Adaptation takes about
60 seconds.
• Reset Digits: Erases any digit adaptation you have done and
resets digit recognition to the factory default. If you have not
adapted digits, this option is grayed out.
• Sound: You can customize the Voice Signal user interface by
turning playback on or off for prompts, names, and numbers.