Samsung SCH-A950WRVXAR - Manual (Page 107)

Section 8: Changing Your Settings 107
System Settings
Sect
ion 8
• On Power Up : The Lock Code is required whenever you
power up the phone.
4. Press to perform the function for the highlighted
option.
Edit Lock Code
The default lock code is the last four digits of your phone
number. Edit Code allows you to change this code to a lock
code of your preference.
1. In standby mode, press MENU, use the right
navigation key to highlight SETTINGS & TOOLS.
Press System. The System menus are listed in the
display.
2. Press Security. You’re prompted to enter the lock
code. The default lock code is the last four digits of your
telephone number.
3. Press Edit Code. Two options are available Device
and Location. Use the navigation keys to highlight your
choice and press
.
4. At the “Enter New Lock Code” prompt, enter the new
lock code. You’re prompted to confirm the new lock
code.
5. “Device or Location Lock Code Changed” message
appears in the display confirming that your lock code has
been changed.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.