Samsung SCH-A950WRVXAR - Manual (Page 117)

Section 8: Changing Your Settings 117
Bluetooth Settings
Sect
ion 8
1. In standby mode, press MENU, use the right
navigation key to highlight SETTINGS & TOOLS.
Press Bluetooth. The Bluetooth menus are listed
in the display.
2. Press Disconnect. If you have an active Bluetooth
connection, a message will say “(device name) IS
CONNECTED. DISCONNECT?”. Highlight Yes to
disconnect or No to cancel and press
.
Registered List
This menu provides a list of Bluetooth wireless
technology devices accessed by your handset. To view the
registered list, use the following procedures:
1. In standby mode, press MENU, use the right
navigation key to highlight SETTINGS & TOOLS.
Press Bluetooth. The Bluetooth menus are listed
in the display.
2. Press Registered List. A list of previously accessed
devices displays.To connect or disconnect a device,
highlight the device and press
.
3. If you are already connected to the device selected, a
message “DISCONNECT FROM (device name) ?”
displays. Highlight Yes to disconnect or No to cancel and
press .
If you are not connected to the device selected, a
message “CONNECT TO (device name) ?” displays.
Highlight Yes to connect or No to cancel and press
.
Note: If the device that you selected is unavailable (e.g. it is paired with
another Bluetooth device), a message “UNABLE TO CONNECT WITH (device