Samsung ML-2151N-XBH - Manual (Page 33)

2.12 S ETTING U P Y OUR P RINTER
For Network Printing
You can attach your ML-2151N or ML-2152W printer to a
network using an Ethernet cable (UTP cable with RJ.45
connector).
ML-2152W also has a network antenna which allows you to use
a wireless LAN interface.
If you are a ML-2150 user, you need to install the optional
network interface card. For a ML-2151N printer, you can replace
the network interface card to one supporting the wireless LAN
interface. For details about installing the card, see page F.6.
Using an Ethernet Cable
1 Make sure that both the printer and the computer are
turned off.
2 Plug one end of the Ethernet cable into the Ethernet
network port on the Printer.
3 Plug the other end of the cable into a network LAN
connection.
See your computer User’s Guide, if you need help.
Using a Network Antenna
1 Screw the wireless network antenna counterclockwise into
the port.
To the network LAN connection