Samsung ML-2151N-XBH User Manual
Page 189
P
RINTING
F
ROM
DOS A
PPLICATIONS
D.6
Config Tab
You can configure various printer features.
• Emulation selects the emulation for printing a document.
The factory default is Auto.
• Power Save determines the length of time the printer waits
after a job is printed before it goes to a reduced power state.
If the printer is used frequently, select OFF which keeps the
printer ready to print with the minimum warm-up time. This
uses more power to keep the printer warm and ready to print.
• Auto Continue determines what action the printer should
take if the Multi-Purpose Tray is empty when a manual feed
print job is sent to the printer. If it is checked, the printer will
pick up the paper from the tray after fifteen seconds.
Otherwise, the printer will wait for you to load paper in the
Multi-Purpose Tray.
• Jam Recovery determines what action the printer should
take when a paper jam occurs. If it is unchecked, the printer
does not reprint a page that has jammed. If it is checked, the
printer keeps the image in memory for a printed page until
the printer signals that the page has successfully printed. The
printer reprints all jammed pages.
• Toner save determines the toner quantity the printer should
use when printing. If it is checked, the printer conserves
toner when printing. The default value is unchecked, which
provides 100% usage.
• Duplex allows you to print on both sides of paper. For details,