Samsung LC24B750XS-ZA - Manual (Page 44)

44
Using MHL
When the mobile device is not connected or does not
support MHL
NOTE
• Mobile Control and MHL are not supported at the same time.
• If the mobile device is not connected or the connected mobile device does not support the MHL function,
the following screen will appear.
• If MHL mode does not activate, check the connection of the mobile device. If MHL mode does not
activate, check if the mobile device supports MHL.
• If MHL mode does not activate even though the mobile device supports MHL, update the firmware on
the device to the latest version.
MHL device is not connected or
the device doesn't support MHL.
MHL MHL
3 sec later
Check Signal Cable
MHL
NOTE
The indicated time "after 3 seconds" may vary depending on the mobile device.
Disabling MHL
When the cable is disconnected or the mobile device is
powered off
If the mobile cable is disconnected or the mobile device is powered off when MHL is active,
the MHL function will be disabled.
MHL
Disconnect device
or
Power off
MHL device disconnected.
3 sec later
Check Signal Cable MHL
NOTE
• If the mobile cable is disconnected, the product will display the message Check Signal Cable and remain
in MHL mode.
• The indicated time "after 3 seconds" may vary depending on the mobile device.