Samsung LC24B750XS-ZA - Manual (Page 25)

25
Using Smart Station
Reinstall and Update
1. Reinstall
If the provided USB cable is connected again after a software program is removed, the
removed program will be detected and a message will appear asking whether you want to
reinstall the software.
To reinstall, select “Yes” to proceed with installation.
2. Software installation using the provided CD
If automatic installation is not supported or you want to reinstall the software manually,
insert the provided CD into your PC and install.
In this case, install the required software programs one after another.
3. Update
If the provided CD is missing or the latest version driver is needed, download the latest
driver from www.samsung.com.
It is best to update your Smart Station monitor periodically to improve the performance.
Connecting a PC to the Smart Station
Monitor (Product)
To use the product, you should connect it to a PC using the wireless-connection dongle or USB
cable.
You can listen to the sound by connecting an audio output device (headphones, etc.) to the
[ ] port. (Audio is not supported when an HDMI-DVI cable is used to connect the product to
the PC.)
Series 5: HDMI mode → USB mode → MHL mode
Series 7: HDMI mode → USB mode → Wireless Connection mode → MHL mode
When the product connects to a PC for the first time, the optimum resolution (1920 x 1080)
will be selected automatically and the display will be set to extended mode. From the next
time the product connects to the PC, a customized resolution will be applied.
NOTE
• When multiple display output ports on the PC are connected to the product at the same time, each
display signal output depends on the system specifications of the PC.
• Wireless Connection is supported on Series 7 only.