Samsung LC24B750XS-ZA User Manual

Page 38

Using Smart Station

Android tablet

* When your mobile device has a normal USB port

Mobile devices should be purchased separately.

Wired connection

Wireless connection (for Series 7 only)

USB

MOBILE

USB Connection Kit (Micro USB to Normal USB)

NOTE

• If your tablet has a Micro USB port, you can use the same connection method as the Android

smartphone. Refer to “Android smartphones”(page 37).

• Charging/Control Mode is not supported and battery charging is not possible.
• Before connecting to your mobile device, check that the Mobile Control icon is found on the far right

side of the taskbar.

1. Connect the mobile cable to the USB Connection Kit. Next, connect the tablet to the Smart

Station monitor using the connected mobile cable and USB Connection Kit.

2. After the connection is established, Fast Control Mode will be set as default. The

charging function will not be available.
* When the USB Connection Kit (Micro USB to Normal USB) is connected, Fast Control

Mode is the default mode. Charging/Control Mode will not be available.

* To charge your tablet, connect the tablet to a USB port on the Smart Station monitor

using the USB cable provided with the tablet.

NOTE

• High-speed charging is possible using the [

] port only. This port allows you to charge a

mobile device twice as fast compared to when charging using a standard USB port.

•

USB Super Charging

mode can be set to

Off

by pressing the [

] button. In

mode, data

transfer is not possible.

3. To move the keyboard and mouse pointer focus to the tablet, press the mouse wheel or

the shortcut keys (Alt + S) on the keyboard. The mouse cursor will move to the tablet. You
can now use the keyboard and mouse on your tablet.

NOTE

• If the keyboard or mouse input focus is on the mobile device, the PC cannot be controlled using the

same input device (keyboard or mouse).

• To move the keyboard and mouse input focus back to the PC, press the center button on the mouse

or press the shortcut keys (Alt+S) on the keyboard.

NOTE

The shortcut keys can be customized.
For details on changing the shortcut keys, refer to "Changing the Settings"(page 40).