Samsung SC-DC163-XAP - Manual (Page 29)

Power Switch
ENGLISH
25
Preparation
Connecting a Power Source
 There are two types of power source that can be connected to your DVD Camcorder.
- The AC Power adapter and AC Cord: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a household power source to use the DVD Camcorder without worrying about the battery power. You can keep the
Battery Pack attached; the battery power will not be consumed.
1. Connect the AC Power adapter (AA-E8 Type) to the
AC Cord.
2. Connect the AC Cord to a wall socket.
The plug and wall socket type may differ according to
your resident country.
3. Open the LCD Screen and Jack Cover.
4. Connect the DC cable to the DC IN jack of the DVD
Camcorder.
5. Set the DVD Camcorder to each mode by holding
down the Green Tab on the [Power] switch and turning
it to [On] or [Off].