Samsung LTP326WX-XAC - Manual (Page 8)

7
1. Using the TV Remote Control in the Anynet System Mode
1. When you select an Anynet menu item for an AV device, the TV remote control
switches to that AV device's mode.
2. You can have the AV device currently running on the Anynet System perform
basic functions from the TV remote control without pressing a separate button to
change modes.
2. Using the “SOURCE” Button in the Anynet System Mode
When you press the “SOURCE” button while you are using the Anynet “Watch” function.
- A message saying “Anynet Mode Off” is displayed on the screen [Fig. 1]
- The device currently selected in the Watch function is turned off.
(except for the device currently recording).
(However, no separate message is provided if you switch inputs while watching a
TV broadcast.)
Chapter 3.
Anynet Remote
Control
[Fig. 1] Message displayed on the TV screen when the
system exits the Anynet “Watch” mode.
BN68-00653H-00Eng.qxd 7/8/04 3:42 AM Page 7