Samsung LTP326WX-XAC - Manual (Page 18)

17
3. Connecting a TV + DVD/VCR Combo
How to Connect the Cables
(
Connect in the order of numbers shown in the diagram.)
Antenna Cable: Connect the external antenna cable to the
ANT Input port on the TV.
Anynet Connector: To use the Anynet, connect the Anynet
port on the TV and the Anynet Input port on the DVD/VCR
Combo using the Stereo-Stereo Anynet connector.
AV Connector: If you do not have a Component cable, connect the A/V output jacks on the DVD/VCR Combo to
the AV IN jacks on the TV.
Component Cable (Sold Separately): If you have the component connector cable,
connect Component Video Out jacks (DVD only) on the DVD/VCR Combo to the Component 1
Video Input jacks on the TV.
Audio Cable: After you complete step 4, connect the Component Audio Output jacks (DVD only) on the
DVD/VCR Combo and the Component Input 1 L-Audio-R jacks on the TV.
Chapter 4.
Connecting/
Installing
an Anynet Device
BN68-00653H-00Eng.qxd 7/8/04 3:42 AM Page 17