Samsung LTP326WX-XAC - Manual (Page 27)

26
5. Connecting a TV + DVD/VCR Combo + DVD Receiver Chapter 4.
Connecting/
Installing
an Anynet Device
How to Connect the Cables
( Connect in the order of numbers shown in the diagram on the previous page.)
Antenna Cable: Connect the external antenna cable to the ANT IN port of the TV.
Anynet Connectors: To use Anynet, connect the Anynet port on the TV and the
Anynet Input port on the DVD/VCR Combo using the Stereo-Stereo Anynet connector.
Anynet Connectors: To use Anynet, connect the Anynet Output port on the
DVD/VCR Combo and the Anynet Input port on the DVD Receiver using the Stereo-Stereo
Anynet connector.
AV Cable: If you do not have the COMPONENT connector, connect the Output
port of the AV output jacks on the DVD/VCR Combo to the AV IN jacks on the TV.
Component Cable (Sold Separately): If you have the component connector,
Connect the Component Video Output jacks (DVD only) on the DVD/VCR Combo and the
Component Input 1 “Y, P
B
, P
R
” jacks on the TV.
Audio Cable: Connect the L-Audio-R COMPONENT Audio In 1 jacks on the TV
to the Analog Audio Output jacks on the DVD/VCR Combo.
Component Cable (Sold Separately): Connect Component Video Out jacks on the DVD Receiver
to the COMPONENT Input 2 “Y, P
B
, P
R
” jacks on the TV.
Audio Connector:Connect the Left-Audio-Right port of Audio Output on the TV and the Audio
Input port on the DVD Receiver.
Optical Cable (Sold Separately): If you have an optical cable, connect the Digital
Audio Output Optical port on the DVD/VCR Combo to theDigital Input port on the DVD Receiver.
To enjoy 5.1-channel sound, go to “Set up” in the Anynet menu and select “Customized
Setup".
BN68-00653H-00Eng.qxd 7/8/04 3:43 AM Page 26