Samsung LTP326WX-XAC - Manual (Page 51)

50
2. Settings Chapter 6.
Anynet Q & A
Problem Solution
Solution1: Check to see if two or more of the same type of device are
connected and if so, remove all such devices but one.
The Anynet System does not function when more than one
of the same type of device is connected.
Solution1: Check the number of the Anynet devices connected and connect
the devices properly according to the connection diagram.
Then go to [
Set up ] in the Anynet menu and select
[Typical Setup] or [Customized Setup].
(The Anynet System supports up to one device from the
Receiver product group and two devices from the DVD product
group.)
Solution1: Make sure that the devices connected support the Anynet.
Remove devices from the new Anynet product groups that
are not supported by the Anynet version currently running on
your TV. Then go to [
Set up ] in the Anynet menu and select
[Typical Setup] or [Customized Setup].
BN68-00653H-00Eng.qxd 7/8/04 3:44 AM Page 50