Samsung LTP326WX-XAC - Manual (Page 5)

4
3. Power for the Anynet System
1. If you press the power button on the remote control while the Anynet System is running,
It turns all devices that have been turned on using the Anynet menu, including the TV, off.
However, if the button is pushed while a device from the DVD/VCR Combo product group is
recording, a dialog is displayed to allow you to check the recording status before the power
is turned off.
2. If you choose to watch on a different device while using the Anynet
It turns all the video devices that are on at the time off.
However, if you switch from “Play DVD ” to “Play VCR ” ,or vice versa
on a DVD/VCR Combo group device, it does not turn the
DVD/VCR Combo off and stops the DVD player or the VCR instead.
In addition, if you switch to another Anynet menu item while a DVD/VCR Combo
group device is recording, the DVD/VCR Combo device is not turned off and no
separate dialog box is displayed.
All units except for the one that is recording
are turned off after three seconds.
Chapter 1.
Anynet Basics
BN68-00653H-00Eng.qxd 7/8/04 3:42 AM Page 4