Samsung LTP326WX-XAC - Manual (Page 16)

15
1. How to Connect Anynet
If you have an Anynet TV, an Anynet DVD/VCR Combo, or an Anynet DVD Receiver
1. If you have one Anynet device,
Connect one end of the Anynet connector to the “Anynet” port on the back
of the TV set and the other to the
input port on the back of the Anynet device.
2. If you have two or more Anynet devices [See Fig. 1],
1) Connect one end of the Anynet connector to the “Anynet” port on the back of the
TV set and the other to the “Anynet” Input port on the back of the first Anynet device.
2) Connect one end of the other Anynet connector to the “Anynet” Output port on the
back of the first Anynet device, and the other to the “Anynet” port on the back of the
second Anynet device.
3) If you have more than two Anynet devices, connect the remaining devices using the
same method.
[Fig. 1]
Anynet TV
Anynet DVD/VCR
Combo
Anynet DVD Receiver
Chapter 4.
Connecting/
Installing
an Anynet Device
BN68-00653H-00Eng.qxd 7/8/04 3:42 AM Page 15