Samsung UN55F8000AFXZA - Manual (Page 95)

88
Setting 3D Effects
There are several adjustments that can be made to make 3D content more enjoyable.
● 3D Perspective
: Adjusts the 3D perspective. Try Now
● Depth : Adjusts the 3D depth. This function is not available if 3D mode is set to (L/R) or
(T/B). Try Now
● L/R Change
: Swaps the left and right pictures. Try Now
● 3D → 2D
: Converts 3D images to normal images. This function is not available if 3D mode is set
to (Normal) or (Off). Try Now
● 3D Auto View : Setting 3D Auto View to On switches the TV to 3D automatically. Setting 3D Auto
View
to
Message Notice
brings up a message screen when the TV receives a 3D signal. If some
applications are running, The TV can not switch 3D. In this case, close the application and then
watch the 3D. This function is available for LED 7400, 7500, 8000, 8200, 8500 series models only.
● 3D Light control
: Adjust the brightness of 3D images. If the screen is too dark, select
High
. This
function is available for LED 7400, 7500, 8000, 8200, 8500 series models only.
3D Channel Viewing
가상리모컨 ¤ >
Menu m >
Broadcastning
>
View 3D Channels
Try Now
Block or allow 3D channels. If 3D channels aren't shown, configure from
Auto Program
(
Broadcasting
>
Auto Program
).
A message will appear on the screen if the program you are watching supports 3D. Follow the
onscreen instructions to view the program in 3D.
Selecting
Off
hides 3D channels from the channel lists and
Guide
.