147 picture test, 147 sound test, 147 voice & motion control environment check – Samsung UN55F8000AFXZA User Manual
Page 154: 147 signal information, 147 reset
146
147
Picture Test
가상리모컨
¤
>
Menu
m
>
Support
>
Self Diagnosis
>
Picture Test
Try Now
The Picture Test displays a high definition picture to examine it for flaws or faults.
If the test picture does not appear or there is noise or distortion, the TV may have a problem. Contact
Samsung’s Call Center for assistance. If the test picture is displayed properly, there may be a problem
with the external device. Please check the connections. If the problem persists, check the signal
strength or refer to the external device’s user manual.
Sound Test
가상리모컨
¤
>
Menu
m
>
Support
>
Self Diagnosis
>
Sound Test
Try Now
Use the built-in melody to check for sound problems.
If no melody is played by the TV’s speakers, make sure
Speaker Select
is set to
TV Speaker
and then
try again. If the problem persists, there may be a problem with the TV. Contact Samsung’s Call Center
for assistance. If the melody is played, there may be a problem with the external device. Please check
the connections. If the problem persists, refer to the external device’s user manual.
Voice & Motion Control Environment Check
가상리모컨
¤
>
Menu
m
>
Support
>
Self Diagnosis
>
Voice & Motion Control Environment Check
Try
Now
Test the the ambient noise and brightness levels to see if they are suitable for SMART Interaction use.
Signal Information
가상리모컨
¤
>
Menu
m
>
Support
>
Self Diagnosis
>
Signal Information
Try Now
The signal Information displays the digital channel signal information and strength. Users can then
adjust the antenna to increase the signal strength and receive HD channels. This option is only
available for digital channels.
Reset
가상리모컨
¤
>
Menu
m
>
Support
>
Self Diagnosis
>
Reset
Try Now
This resets all settings to the factory default settings except for the network settings. Select Reset,
enter the PIN code when requested, and then select
Yes
. All settings are then reset. The TV turns off
and on again automatically and then displays the
Setup
screen. For more information on resetting the
TV, refer to the user manual that came with the TV.