Avocent Cyclades PM IPDU - Manual (Page 41)

Chapter 3: Accessing the PM IPDU via the Command Line Interface 31
Arguments
Examples
To get the current status of the syslog notification, enter:
To turn on and off the syslog notification, enter as necessary:
temperature
The temperature command displays the PM IPDU’s surrounding temperature and the maximum
temperature the unit has registered (temperature peak). It may also be used to clear the saved peak
temperature value.
Syntax
temperature [|]|reset
Arguments
Examples
To get the temperature for all units in a daisy chain, enter:
on Enables message to be displayed in the console when there is an over
current situation
off Disables the message notification
status Displays the current syslog status of all PM IPDUs on the daisy chain
no argument Same as status
pm>syslog
pm>syslog on
pm>syslog off
IPDU number in a daisy chain
Identification string previously set by the id command
reset Resets the maximum temperature registered
pm>temperature