Avocent Cyclades PM IPDU - Manual (Page 39)

Chapter 3: Accessing the PM IPDU via the Command Line Interface 29
without a parameter reboots the first unit in a chain, not all the units in a chain. This command is
available to the admin user only.
Syntax
reboot [|]
Arguments
Examples
To reboot the first unit of the chain, or to reboot the unit in standalone mode, enter:
To reboot the a specific IPDU in the chain (IPDU 2 shown), enter:
restore
The restore command restores the configuration currently saved in Flash. This command is
available to the admin user only.
Syntax
restore
Arguments
N/A
Examples
To restore the configuration currently saved in Flash, enter:
save
The save command saves the current configuration in the Flash device built in to all PM IPDU
units. This command saves the username/password database and the specific information
pertaining to each outlet such as outlet name, outlet assignments and outlet state. This command is
available to the admin user only.
IPDU number in a daisy chain
Identification string previously set by the id command
pm>reboot
pm>reboot 2
pm>restore