Avocent Cyclades PM IPDU - Manual (Page 29)

Chapter 3: Accessing the PM IPDU via the Command Line Interface 19
Arguments
Examples
To cycle outlet 3, enter:
To cycle outlets 2, 3, 5, 6 and 7, enter:
dbsync
The dbsync command synchronizes the user database for all PM IPDUs in the chain. This
command is available to the admin user only.
Syntax
dbsync
Arguments
none
Examples
To synchronize the user database for all PM IPDUs in the chain, enter:
deluser
The deluser command deletes one username from the internal database. This command is available
to the admin user only.
Syntax
deluser
Arguments
Desired username
all Cycles all outlets in the PM IPDU or PM IPDU daisy chain
Outlet number, such as “5”, outlet name such as “sunfire”, or group
of outlets such as “1, 3-5”
pm>cycle 3
pm>cycle 2, 3, 5-7
pm>dbsync