Display – Avocent Cyclades PM IPDU User Manual
Page 30
20 Cyclades PM IPDU Installer/Administrator/User Guide
Examples
To delete the user “rog”, enter:
display
The display command allows logical inversion of the 2-digit, 7-segment display. The purpose of
this command is to allow a PM IPDU to be mounted upside-down. This command is available to
the admin user only.
NOTE: The decimal point will be at the top of the display when the PM IPDU is mounted upside down.
On the PM42 IPDU, this command either allows you to manually step through the current level
views of each bank of outlets, or to set an interval for the current level views to automatically be
displayed.
NOTE: The display on the PM42 IPDU may be physically rotated.
Syntax
For single phase PM IPDUs:
display [
For the PM42 IPDU:
display [
-or-
display
Arguments
pm>deluser rog
no argument
Show display status of all PM IPDUs in the daisy chain
Number of the PM IPDU in the chain
Identification string previously set by the id command
0
Normal mode (default)
180
Inverted display