Samsung L74 User Manual

Page 14

O If the memory card is subjected to any of the following, the recorded data

may become corrupted :

- When the memory card is used incorrectly.

- If the power is switched off or the memory card is removed while

recording, deleting (formatting) or reading.

O Samsung cannot be held responsible for lost data.

O It is advisable to copy important data onto other media as back-up e.g. floppy

disks, hard disks, CD etc.

O If there is insufficient memory available : A [Memory Full!] message will

appear and the camera will not operate. To optimise the amount of memory
in the camera, replace the memory card or delete unnecessary images
stored on the memory card.

Instructions on how to use the memory card

Don’t remove the memory card when the camera status lamp is blinking

as this may cause damage to data in the memory card.

The camera can use SD/SDHC Memory Cards and MMC (Multi Media

Cards). When using MMC cards, please consult the instructions supplied
with the cards.

The SD/SDHC memory card has a write
protect switch that prevents image files from
being deleted or formatted. By sliding the
switch towards the bottom of the SD memory
card, the data will be protected. By sliding
the switch towards the top of the SD memory
card, the data protection will becancelled.
Slide the switch to the top of the SD memory
card before taking a picture.

Card pins

When using a 256MB MMC memory, the specified shooting capacity will

be as follows. These figures are approximate as image capacities can be
affected by variables such as subject matter and memory card type.

Ú The recording times can be changed by the zoom operation.

The zoom button doesn’t operate while recording movies.

Write protect

switch

Label

[SD (Secure Digital) memory card]

INFORMATION

Recorded image size

Super Fine

Fine

Normal

30FPS

20FPS

15FPS

116

171

137

192

166

229

162

223

131

236

318

381

520

600

About 11'

About 13'

About 21'

About 29'

About 54'

*Movie

Still

image