Pro-Lite ArizonaSun User Manual
Page 7
ARIZONA SUN
6
1. Press the [LOCK] key.
2. Press the [Run/Stop] key - The running display won’t be controlled. (Normally, the
message will stop running, but in this case, you lose the control)
3. Press the [LOCK] key and followed by the numeric code. The message should stop
running, and the display is under control again.
4. ArizonaSun remains unlocked until the [LOCK] key is pressed again.
5. Press [LOCK] key to resume the display animation.
ADDING DISPLAY FUNCTIONS TO THE MESSAGE
The ArizonaSun includes the function that allows the user to be creative in how the message
will be displayed. The display functions allows you to:
• Enlarge
characters
• Make message flash on and off
• Choose the speed of messages
• Choose direction of messages
• Stop
messages
• Make message scroll on and off the screen
Adding Enlarge and Flash Character
The FAT command enlarges characters and FLASH command makes characters or entire
message flash on and off. Both commands shall be entered before characters and entered at the
last position of the messages to terminate them.
Press [Alt] key and then the [FAT] key. The display will appear
Press [Alt] key and then the [FLASH] key. The display will appear
[Procedures]
1. Press [Run/Stop] key and then the [PROG] key to enter editing mode.
2. Press [Alt] key and then the [FAT] key.
3. Use the character keys and enter messages. (For example: ARIZONASUN)
4. Press [Alt] key and then the [FAT] key to terminate the FAT command.
5. The display should read:
Note: The same procedures can be applied to adding the FLASH command to the message.
Setting the Speed of the Message
[Procedures]
1. Press [Run/Stop] key and then the [PROG] key to enter editing mode.
2. Press the [Alt] and then the [SPEED] key.
3. The display should read:
4. Enter the number ‘3’