Pro-Lite PL-XPSB4014 (shown) - Manual (Page 9)

Editing Your Message
Now that you have programmed a simple message, let's change that message
from "HELLO" to "HELLO MY NAME IS JOE".
Press Display Description
1 RUN/STOP STOP MODE Stops the sign
2. PROG PAGE (A-Z)? A Program a message
3. A (PG: A START) Program PAGE A
4. HELLO View previously pro-
grammed message from
right to left until "O" "is the
last character on the right
TIP: Use the right arrow key or the left arrow key to view and edit your
programmed message.
5. SPACE M Y SPACE HELLO MY NAME Key in "MY NAME IS
N A M E SPACE IS JOE JOE” using the character
I S SPACE J O E keys
6. RUN/STOP HELLO MY NAME Runs the message you
IS JOE programmed
Deleting characters using the DEL key.
You can easily delete characters from your message by using the DEL key.
Let's change "HELLO MY NAME IS JOE" to "HELLO JOE".
1. Press RUN/STOP to stop the sign.
2. Press PROG to program a message.
3. Press A to program PAGE A. The sign will read: (PG: A START)
4. Press the key until the letter "S" from the word "IS" is the last character
on the right. Remember, you can use the key if you scroll too far.
5. Now press the DEL key until the word "HELLO" is the only word seen on
the sign.
6. Press RUN/STOP to run the message.
7. "HELLO JOE" should now be seen on the sign.
2