Programming alternate characters – Pro-Lite PL-XPSB4014 (shown) User Manual
Page 10
PROGRAMMING ALTERNATE CHARACTERS
Display lower-case Letters, numbers, and symbols using the
SHIFT key.
Please take notice of the COLORED BLOCK, which appears on the left hand
corner of the sign whenever the SHIFT key is pressed in the following steps.
1.
Press RUN/STOP to stop the sign.
2.
Press PROG to program a message.
3.
Press B to program PAGE B. The sign will read: (PG: B START)
4.
Press A to display the letter" A".
5.
Press the SHIFT key once. Now press any one of the orange letter
character keys on the IR Remote. ORANGE COLORED BLOCK = orange
character keys active (lower-case mode).
6.
Press SHIFT again. Now press any one of the white number character
keys on the IR Remote. RED COLORED BLOCK = white character keys
active (numerical mode).
7.
Press the SHIFT key again. Now press any one of the green symbols
character keys on the IR Remote. GREEN COLORED BLOCK = green
character keys active (symbols mode).
8.
Press SHIFT again to return you to the upper-case mode. Press any letter
key to verify that you are back in the upper-case mode.
NOTE: Upper-Case mode is the default selection when beginning to program.
Once you press the SHIFT key, you are no longer in the upper-case mode.
Follow steps 5 - 8 to toggle between modes.
9.
Press RUN/STOP to run your message.
Displaying European characters using the ALT-CHAR key.
1.
Press RUN/STOP to stop the sign.
2.
Press PROG to program a message.
3.
Press C to program PAGE C. The sign will read: (PG: C START)
4.
Press A to display the letter "A".
5.
Now press the ALT-CHAR key. As you will notice, the letter "A" has now
changed its shape to the European letter "À". Continue to press the
ALT-CHAR key until you reach the European style "A" of your choice.
TIP: To revert back to the normal character, continue to press ALT-CHAR .
Also, you can press any letter at any time to continue to type normal characters.
6.
Following previous steps 4 and 5, try to display the European character for
the letter "U".
7.
Press RUN/STOP to run your message.
3