Pro-Lite PL-XPSB4014 (shown) - Manual (Page 17)

The TARGET Function
What you should know about the TARGET function.
You should be familiar with Pages 1-9 before beginning.
NOTE: Due to varying outlet frequencies, power outages and/or incorrect entry
of information, Pro-Lite, Inc. will not be responsible for counter inaccuracies.
There are 2 types of' TARGET options:
1) Count Up to TARGET.
2) Count Down to TARGET.
• If you select to "Count Up to TARGET" and you set the TARGET to be
reached 30 days from now, you can have your message read "2 Days have
passed", "3 Days have passed", "4 Days have passed". . . , See "Count
Up" to TARGET.
• If you select to "Count Down to TARGET" and you set the TARGET to be
reached 30 days from now, you can have your message read "29 Days to
reach our target", "28 Days to reach our target", "27 Days to . . .”, See
"Count Down" to TARGET.
NOTE: Please be aware that any interruption of power will cause the TARGET
Function to reset.
"Count Up" to TARGET setup
1. Begin by setting the current DATE and TIME.
2. Press RUN/ST0P to stop the sign.
3. Press the TARGET key. The sign will read: Count Up/Dn.
4. Press U to count UP to the specified TARGET.
5. If you want your TARGET to be reached in days, press D . If you want
your TARGET to be reached in hours, press H .
6. The sign will read: TARGET: 0000. Key-in the number of days or hours to
specify a TARGET. For example: If you wanted the TARGET to be reached
in 125 days, press 1 2 5 . The sign will display: TARGET: 0125
TlP: If an incorrect entry is made, key-in 0 four times to clear the entry.
7. Press ENTER . The sign will read: START: 0000. Key-in the number of
days or hours to specify a start point. For example: If you wanted to start
the counter at day 10, press 1 0 . The sign will display: START: 0010
NOTE: If you selected “D" for Days in step 5, your start point in step 7 will auto-
matically be in days. If you selected “H” for Hours, your start point will
automatically be in hours.
8. Press ENTER . The sign will read: PAGE (A-Z)? A. Key-in the PAGE
LETTER you want to run when the TARGET is reached. For example: If
you wanted to run PAGE "D" when the TARGET is reached, press D .
9. Press ENTER to confirm your entry and to start the counter.
10. The sign will read: STOP MODE
11. Press RUN/STOP to run the sign.
10