Pro-Lite PL-XPSB4014 (shown) - Manual (Page 4)

UNPACKING
The complete package consists of the following items:
1.
Electronic message sign
2. Wireless Infrared Remote Keyboard
3. Power adapter
4. User's manual
5. Warranty Registration Card
6. Two mounting brackets
*
Wall mounting screws not included
7. 30-day TRIAL Software and PC cable.
8. Accessories Brochure/Order Form
If you notice a missing item(s), please contact Pro-Lite, Inc. within 7 days of
purchase at 714-668-9988.
INSTALLATION AND SET UP
1. Mount the brackets onto the chosen wall location. Use the mounting screws
included with the display to fasten the brackets onto the sign.
2. There are two wires from the power adapter. First connect the two-prong
end to any 110V/120V AC wall outlet. Second, connect the single prong
end to the display via the location on the end cap.
3. As soon as you connect the single prong end to the sign, the sign should
automatically light up and start displaying the "demo" message that is a
preprogrammed message showing all the features of the display. Note: If
your sign does not turn "ON", please turn to the Help Section on page 18.
4. Surge protectors are recommended if you are in an area where power out-
ages are frequent.
WARNING! U.S. PATENT NOTICE
Pro-Lite displays are protected by one or more U.S. Patents. Companies or indi-
viduals that copy or infringe Pro-Lite products in part or in whole will be prose-
cuted to the full extent possible under the law of the United States.
MOVING SIGN PANEL
TO MAINS
POWER ADAPTOR
SENSOR
IR REMOTE
KEYBOARD
LOW VOLTAGE AC/DC
POWER INPUT
(FROM ADAPTOR)
RS 232 SERIAL
INTERFACE
III