Maintenance, Diagnostic codes, Siting references – Campbell Scientific WINDSONIC 2-D Sonic Wind Sensors User Manual
Page 6: Appendices a, Figures, Tables

Table of Contents
Changing the SDI-12 Address Using LoggerNet and a Datalogger .. 22
Array-Based Edlog Dataloggers................................................. 22
Table-Based Edlog Dataloggers................................................. 24
CR200(X)-series Datalogger...................................................... 25
Maintenance ..............................................................26
Diagnostic Codes......................................................27
Siting References......................................................28
Appendices
WindSonic Orientation ...........................................A-1
Determining True North and Sensor Orientation ............................ A-1
Online Magnetic Declination Calculator ......................................... A-3
Updating an Older Program for Measuring a
WindSonic1 With the New Settings.....................B-1
Figures
4-1. WindSonic mounted on a CM202 using pn 17837.............................. 3
6-1. White dot indicating that the WindSonic1 has the newer settings..... 10
7-1. SDI-12 Transparent Mode on an Edlog array-based datalogger
7-2. SDI-12 Transparent Mode on an Edlog table-based datalogger
7-3. SDI-12 Transparent Mode on a CRBasic CR200(X)-series
A-1. Magnetic declination for the conterminous United States (2004) ... A-1
A-2. A declination angle east of True North (positive) is subtracted
from 360 (0) degrees to find True North...................................... A-2
A-3. A declination angle west of True North (negative) is subtracted
from 0 (360) degrees to find True North...................................... A-2
calculator ..................................................................... A-3
Tables
Frequencies....................................................... 10
7-2. WindSonic1 to Datalogger Connections ........................................... 11
7-3. WindSonic1 to SDM-SIO1 Connections........................................... 11
7-4. WindSonic4 to Datalogger Connections ........................................... 12
7-5. CRBasic Datalogger Operating Systems that Support RS-232
Communications and SerialInRecord().......................................... 13
CR1000 Example Program.............................................. 13
7-7. Wiring for CR1000/SDM-SIO1 Program Example........................... 14
ii