Campbell Scientific OBS-5+ Sediment Concentration Monitor and Pressure Sensor - Manual (Page 26)

OBS-5+ System
6.2.12 Data Retrieval
1) Remove dummy plug and connect OBS-5+ to PC with test cable (FIGURE
6-1).
2) Run OBS-5+ Utility.
3) Open the Data Window to verify that the instrument is transmitting data.
4) Click to end data collection and use Offload Data to save data in
a file.
5) Highlight the data with the start and end times you want.
6) Click Browse, select a destination file and click OK.
7) Wait for the progress bar to disappear and examine data as a plot or text
file (see Section 6.2.5, Testing Sensors).
6.2.13 Shutdown
From the OBS-5+ menu, select Sleep.
6.2.14 Graphing and Printing
1) Use File menu to select how the data file will be opened.
18